LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1065 (Engine Mechanical - 4.3L) >> Repair Instructions - On Vehicle >> Oil Level Indicator and Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra and 2008 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Oil Level Indicator
    GM330580Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil level indicator.
  2. Remove the right exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side (4.3L) .
    3. Fig 2: Locating Oil Level Indicator Tube Bolt
    GM172977Courtesy of GENERAL MOTORS CORP.
  3. Remove the oil level indicator tube bolt.
  4. Remove the oil level indicator tube using a twisting motion.
  5. Clean the old sealer from the indicator tube and engine block.
scientia non olet · About LEMON Manuals