LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1064 (Propeller Shaft And Universal Joints) >> Diagnostic Information and Procedures >> Ping, Snap, or Click Noise

Ping, Snap, or Click Noise

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Checks Action
DEFINITION: A ping, snap or click is usually heard on initial load after the transmission is in gear, either in forward or reverse.
A loose pinion yoke or companion flange. Tighten the bolts and the pinion nut to specified torque. Refer to Fastener Tightening Specifications .
One or more of the universal joints are worn or damaged. Replace the universal joint. Refer to the following:
Heat shield interference Eliminate interference.