LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1063 (Front Drive Axle) >> Repair Instructions >> Bracket Replacement (25, 35 Series) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the differential carrier assembly. Refer to Differential Carrier Assembly Replacement (1500 FWD)  or Differential Carrier Assembly Replacement (2500 4WD) .
  3. For the 6.0L engine, remove the air conditioning compressor. Refer to Air Conditioning Compressor Replacement (LY2, LY5, LH6, L76, L92 and LMG) or Air Conditioning Compressor Replacement (LLY/LMM) or Air Conditioning Compressor Replacement (LU3) .
    4. Fig 1: Front Axle Mounting Bracket - Front Drive Axle (8.25 S4WD and 9.25 Axles)
    GM365933Courtesy of GENERAL MOTORS CORP.
  4. Remove the nuts and the washers from the bracket.
  5. Remove the bracket from the vehicle.
scientia non olet · About LEMON Manuals