LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1063 (Front Drive Axle) >> Repair Instructions >> Bracket Replacement (25, 35 Series) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Axle Mounting Bracket - Front Drive Axle (8.25 S4WD and 9.25 Axles)
    GM365933Courtesy of GENERAL MOTORS CORP.
  1. Install the bracket to the vehicle.
  2. NOTE: Refer to Fastener Notice .
  3. Install the washers and the nuts to the bracket.

    Tighten:  Tighten the bracket to frame nuts to 90 N.m (67 lb ft).

  4. For the 6.0L engine, install the air conditioning compressor. Refer to Air Conditioning Compressor Replacement (LY2, LY5, LH6, L76, L92 and LMG) or Air Conditioning Compressor Replacement (LLY/LMM) or Air Conditioning Compressor Replacement (LU3) .
  5. Install the differential carrier assembly. Refer to Differential Carrier Assembly Replacement (1500 FWD)  or Differential Carrier Assembly Replacement (2500 4WD) .
  6. Lower the vehicle.