LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1046 (Engine Controls And Fuel - 4.8L, 5.3L, 6.0L, 6.2L, Or 7.0L - DTC P0010 To DTC P0230) >> DTC P0016 (w/o LY6) >> Circuit/System Verification (w/o LY6)

Circuit/System Verification (w/o LY6)

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start the engine.
  2. Allow the engine to reach normal operating temperature.
  3. Allow the engine to idle.
  4. Observe the DTC information with a scan tool.
    • If the scan tool indicates P0016 has failed this ignition cycle, continue with the Circuit/System Testing.
    • If the vehicle passes the Circuit/System Verification Test, then operate the vehicle within the Conditions For Running The DTC. You may also operate the vehicle within the conditions that are captured in the Freeze Frame/Failure Records Data List.
scientia non olet · About LEMON Manuals