LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1038 (Engine Exhaust System) >> Repair Instructions >> Exhaust Pipe Replacement - Left Side (6.6L) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Left Exhaust Heat Shield & Nuts
    GM707396Courtesy of GENERAL MOTORS CORP.
  1. Remove the transmission. Refer to Transmission Replacement .
  2. Remove the exhaust heat shield nuts (2) and heat shield (3) from the dash panel.
  3. Fig 2: View Of Exhaust Outlet
    GM1334829Courtesy of GENERAL MOTORS CORP.
  4. Remove the exhaust pipe heat shield bolts and shield.
  5. Fig 3: Left Exhaust Pipe Bolts Removal Sequence
    GM721427Courtesy of GENERAL MOTORS CORP.
  6. Remove the exhaust pipe bolts in the sequence shown.
  7. Fig 4: View Of Left Exhaust Pipe
    GM1334832Courtesy of GENERAL MOTORS CORP.
  8. Remove the exhaust pipe and gaskets. Discard the gaskets.