Input Internal Gear, Reaction Shaft and Shell Installation: Installation

WARNING: This page is about a different car, the 2008 GMC Sierra and 2008 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Input Internal Gear, Reaction Shaft & Sun Shell

Courtesy of GENERAL MOTORS CORP.

Install the reaction sun shell (670) into the reaction sun gear.
Install the thrust bearing (669) using J 36850 onto the reaction carrier shaft, tangs up, toward the shaft. See Special Tools .
Install the input internal gear (664) and reaction carrier shaft (666) assembly into the sun gear shell. Index the reaction carrier shaft spline into the reaction carrier.