LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1028 (Engine Controls And Fuel - 6.6L - Introduction (2 Of 2)) >> Repair Instructions >> Fuel Rail Fuel Feed Pipe Replacement - Left Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Left Fuel Rail Feed Pipe Fittings
    GM1387871Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel return pipe to fuel injection pump fuel hose. Refer to Fuel Return Hose Replacement - Fuel Return Pipe to Fuel Injection Pump .
  2. Loosen the left fuel rail fuel feed pipe fittings (1).
    3. Fig 2: View Of Left Fuel Rail At Pump Pipe
    GM1335603Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Note the routing of the left fuel rail fuel feed pipe under the fuel feed and return pipes.
  3. Remove the left fuel rail fuel feed pipe.
scientia non olet · About LEMON Manuals