LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1027 (Engine Controls And Fuel - 4.3L - Introduction (2 Of 2)) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement (Extended Cab w/26 Gal Tank) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra and 2008 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Tank Pressure Sensor
    GM1854691Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement (Regular Cab w/26 Gal Tank)  or Fuel Tank Replacement (Extended Cab w/26 Gal Tank)  or Fuel Tank Replacement (Regular Cab w/34 Gal Tank) .
  2. Remove the fuel tank pressure sensor by pulling straight up using a slight rocking motion.
scientia non olet · About LEMON Manuals