Removal Procedure
- Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling Zone 3
in SIR.
- Remove the inflator module. Refer to Horn Switch Replacement in SIR.
- Remove the horn switch. Refer to Horn Switch Replacement .
- Make an alignment mark in order to note the relationship of the steering wheel to the steering shaft.
- Remove the steering wheel nut.
- Remove the steering wheel using:
- J 1859-A
(1) with
- J-36541-A
(2) or J 42578
(2). See Special Tools .
Courtesy of GENERAL MOTORS CORP.