Removal Procedure

CAUTION: Refer to SIR Caution in Cautions and Notices.

Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
Remove the ignition switch. Refer to Ignition Switch Replacement .
Remove the turn signal cancel cam. Refer to Steering Column Tilt Head Housing Replacement (Tilt) .
Remove the park lock cable from the lock cylinder housing.
Remove 3 TORX® screws.

Fig 1: View Of Lock Cylinder Housing TORX Screws
Courtesy of GENERAL MOTORS CORP.
Remove the lock cylinder housing from the steering column.