LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Optra5 LT, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Panel Replacement - Instrument Panel (I/P) Center (Four Door) >> Installation Procedure

Installation Procedure

    Fig 1: View Of Center Molding
    GM1508816Courtesy of GENERAL MOTORS CORP.
  1. Connect the mode control cable to the mode door.
  2. Connect the electrical connector.
  3. Install the center molding.
scientia non olet · About LEMON Manuals