LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Optra5 LT, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Stop Lamp Switch Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Stop Lamp Switch Connector
    GM1289934Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Disconnect the stop lamp switch from the plug connector.
  3. Turn the switch. Remove the switch from the brake pedal bracket.