Instrument Panel Cluster (IPC) Replacement (Monte Carlo)

Fig 1: Replacing Instrument Panel Cluster (IPC)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the Instrument Panel Cluster Trim Plate. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster (Monte Carlo) .
1	Screw, Instrument Panel Cluster (Qty 4) Tighten: 2 N.m (18 lb in)
2	Cluster Assembly, Instrument Panel Tip: Disconnect the electrical connector.