Floor Console Arm Rest Hinge Replacement - (Impala)
Hinge Replacement - Floor Console Arm Rest (Impala)
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
in Cautions and Notices. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the Front Floor Console Armrest Assembly. Refer to Hinge Replacement - Floor Console Arm Rest (Impala) . |
|
| 1 | Screw, Front Floor Console Armrest (Qty 8) Tighten: 2 N.m (18 lb in) |
| 2 | Armrest Assembly, Front Floor Console Armrest Tip: Separate the armrest cover assembly from the inner panel. |
| 3 | Panel, Front Floor Console Armrest Inner Tip: Rotate the inner panel in order to access the hinge screws. |
| 4 | Screws, Front Floor Console Armrest Hinge (Qty 4) Tighten: 2 N.m (18 lb in) |
| 5 | Hinge Assembly, Front Floor Console Armrest Tip: Remove the hinge from the inner panel. |