LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Impala LTZ >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Diagnostic Information and Procedures >> Driver Information Center (DIC) Switch(es) Inoperative >> Circuit/System Testing

Circuit/System Testing

  1. With the ignition ON, install a scan tool.
  2. Activate and release each of the DIC switches.
  3. With the scan tool observe the DIC information switch parameters in the IPC scan tool Data List
    • If the test lamp does not illuminate, check the DIC switch ignition 1 voltage circuit for an open or a high resistance.
  4. Connect a test lamp between the DIC switch ignition 1 voltage circuit and the DIC switch ground circuit.
    • If the test lamp does not illuminate, check the DIC switch ground circuit for an open or a high resistance.
scientia non olet · About LEMON Manuals