Circuit/System Description

The engine oil pressure (EOP) sensor changes voltage based on the engine oil pressure. The EOP sensor is a 3-wire sensor comprising of the signal circuit, the low reference circuit and the 5-volt reference circuit. The engine control module (ECM) or the powertrain control module (PCM) supplies 5-volts to the EOP sensor via the 5-volt reference circuit and provides ground via the EOP low reference circuit. The ECM/PCM monitors the signal circuit of the EOP sensor to determine the engine oil pressure sensor voltage is within the normal operating range of approximately 1-4 volts. When the engine oil pressure is high, the EOP sensor voltage is high and the ECM/PCM senses a high signal voltage. When the engine oil pressure is low, the EOP sensor voltage is low and the ECM/PCM senses a low signal voltage. The ECM/PCM sends the EOP information to the instrument panel cluster (IPC) via GMLAN serial data message.