Elapsed Time

The timer records elapsed time starting from activation. When the driver information center (DIC) displays the timer, pressing the SET/RESET switch for 1.0 seconds on the DIC resets the timer. Pressing the SET/RESET button on the DIC switch for approximately 1.0 seconds starts and stops the timer. The DIC displays the timer in one of the following formats:

The DIC displays the timer in the following format: XX: XX:XX:

The first XX represents hours elapsed, the second XX represents minutes elapsed, and the third XX represents seconds elapsed. The maximum range of the timer is 99 hours, 59 minutes, and 59 seconds. After the maximum range is reached, the timer displays all zeros (00:00:00).