Shock Absorber Replacement

Fig 1: Shock Absorber Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the wheel. Refer to Tire and Wheel Removal and Installation .
1	Rear Shock Absorber Upper Bolt (Qty: 1) Tighten: 90 N.m (66 lb ft) Rear Shock Absorber Lower Bolt (Qty: 1) Tighten: 125 N.m (92 lb ft)
2	Rear Shock Absorber

Callout

Component Name

NOTE: Refer to Fastener Notice .

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Rear Shock Absorber Upper Bolt (Qty: 1)

Tighten: 90 N.m (66 lb ft)

Rear Shock Absorber Lower Bolt (Qty: 1)

Tighten: 125 N.m (92 lb ft)

Rear Shock Absorber