Wheel Bearing/Hub Replacement - Front
Wheel Bearing/Hub Replacement - Front
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications .Preliminary Procedures
|
|
| 1 | Axle Shaft Nut Tighten: 110 N.m (81 lb ft) |
| 2 | Wheel Speed Sensor Connector Tip: If equipped. |
| 3 | Wheel Bearing Bearing/Hub Assembly Bolt (Qty: 3) Tighten: 115 N.m (85 lb ft) |
| 4 | Wheel Bearing/Hub Assembly Bearing |
| 5 | Wheel Bearing/Hub Assembly Spacer |