Trim Pad Replacement - Instrument Panel (I/P) Upper

Fig 1: Trim Pad Replacement - Instrument Panel (I/P) Upper

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the windshield garnish moldings. Refer to Windshield Garnish Molding Replacement . Remove the instrument panel cluster bezel trim plate. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster . Remove the instrument panel accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory . Remove the instrument panel center compartment. Refer to Compartment Replacement - Instrument Panel (I/P) - Center . Remove the instrument panel inflatable restraint. Refer to Inflatable Restraint Instrument Panel Module Replacement .
1	Screw, Instrument Panel Upper Trim Pad (Qty: 5) Tighten: 2 N.m (18 lb in)
2	Pad Assembly, Instrument Panel Upper Trim Tip: Disconnect the electrical connectors.
3	Clip, Retainer (Qty: 14)