Instrument Panel Tie Bar Replacement

Fig 1: Instrument Panel Tie Bar Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the instrument panel retainer. Refer to Instrument Panel (I/P) Retainer Replacement . Remove the bolts securing the brake pedal assembly to the carrier. Refer to Brake Pedal Assembly Replacement . Remove the air distribution duct assembly. Refer to Air Distribution Duct Replacement . Remove the right defogger outlet duct assembly. Refer to Defogger Outlet Duct Replacement - Side Window, RH . Remove the left defogger outlet duct assembly. Refer to Defogger Outlet Duct Replacement - Side Window, LH .
1	Instrument Panel Tie Bar Assembly to HVAC Module Bolts (Qty: 3) Tighten: 4 N.m (35 lb in)
2	Instrument Panel Tie Bar Assembly to Body Bolts (Qty: 6) Tighten: 25 N.m (18 lb ft)
3	Instrument Panel Tie Bar Assembly to HVAC Module Nut (Qty: 1) Tighten: 4 N.m (35 lb in)
4	Instrument Panel Tie Bar Assembly Tip: Note the routing of the wiring harness prior to removal to aid in the reinstallation. With the aid of an assistant, remove the carrier from the vehicle.