LEMON Manuals
: Even more car manuals for everyone
Home
>>
Chevrolet
>>
2006
>>
HHR LS, Automatic
>>
Repair and Diagnosis
>>
Accessories & Equipment
>>
Gauges & Instrument Panels
>>
Instrument Panel System Displays, Gauges And Console
>>
Diagnostic Information and Procedures
>>
DTC B2961
>>
Conditions for Setting the DTC
Conditions for Setting the DTC
The ignition 1 voltage circuit is active and the key in ignition switch signal circuit is inactive and the signal circuit is high.
The above condition is present for greater than 5 seconds.