Circuit/System Testing
- Ignition ON, headlamp switch OFF, verify the scan tool Headlamp Off Switch parameter is Off.
- If not Off, test the headlamps off signal circuit for an open or short to voltage. If the circuit tests normal, replace the headlamp switch.
- Ignition ON, park lamp switch OFF, verify the scan tool Park Lamp Switch parameter is Off.
- If not Off, test the park lamp switch signal circuit for an open or short to voltage. If the circuit tests normal, replace the headlamp switch.
- Ignition OFF, key out of the ignition, verify the scan tool Key In Ignition Cylinder parameter is No.
- If not No, test the key in ignition switch signal circuit for an open or short to voltage. If the circuit tests normal, replace the ignition switch.
- Ignition ON, doors closed, verify the scan tool Door Ajar Switch parameters.
- If any parameter displays Door Ajar, go to Courtesy Lamps Always On .
- If all parameters display Door Closed, replace the BCM.