LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Pedal Position Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
Fig 1: Removing/Installing CPP Switch From/To Clutch Pedal
GM1547861Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector (2) from the clutch pedal position (CPP) switch (1).
  2. Rotate the CPP switch (1) counterclockwise to release, and remove the switch from the clutch pedal assembly.
scientia non olet · About LEMON Manuals