LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Pedal Position Switch Adjustment (Old Pedal) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Removing/Installing CPP Switch From/To Clutch Pedal
    GM1547861Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector (2) from the clutch pedal position (CPP) switch (1).
  2. Remove the CPP switch (1) from the clutch pedal by twisting the CPP switch (1) counterclockwise.
scientia non olet · About LEMON Manuals