LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Pedal Engine Start Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the clutch pedal position switch (2) from the clutch pedal.
  2. Fig 1: View Of Clutch Pedal Position Switch
    GM889965Courtesy of GENERAL MOTORS CORP.
  3. Remove the electrical connector (1) from the clutch pedal position switch (2).