LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Pedal Engine Start Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the electrical connector (1) to the clutch pedal position switch (2).
    2. Fig 1: View Of Clutch Pedal Position Switch
    GM889965Courtesy of GENERAL MOTORS CORP.
  2. Install the clutch pedal position switch to the clutch pedal.
  3. Push the clutch pedal all the way to the floor to adjust the switch.
scientia non olet · About LEMON Manuals