LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Actuator Cylinder Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Hydraulic Clutch Hose
    GM851233Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the clutch actuator cylinder line.
  2. Remove the transmission. Refer to Transmission Replacement in Manual Transmission - M86/M94 Getrag.
    3. Fig 2: Locating Clutch Actuator Cylinder Bolts
    GM621539Courtesy of GENERAL MOTORS CORP.
  3. Remove the clutch actuator cylinder bolts from the transmission.
    4. Fig 3: Locating Upper Line Release Bolt
    GM621542Courtesy of GENERAL MOTORS CORP.
  4. Remove the following components from the transmission:
    • The upper bolt
    • The clutch actuator cylinder
scientia non olet · About LEMON Manuals