LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Manual Transaxle - Mu3 - Service & Diagnosis) >> Repair Instructions >> Shift Cable Adjustment

Shift Cable Adjustment

WARNING: This page is about a different variant/trim than selected.
  1. Set the parking brake.
  2. Remove the cup holder. Refer to Cupholder Replacement - Front Floor Console in Instrument Panel, Gages and Console.
    3. Fig 1: Unlocking Shift Cable Retainers
    GM651293Courtesy of GENERAL MOTORS CORP.
  3. Lift and unlock the shift cable retainers.
    4. Fig 2: Locating Shifter 4th Gear Locking Tab
    GM1390787Courtesy of GENERAL MOTORS CORP.
  4. Push the shifter 4th gear lock clip. Move the shifter slightly in order to center the lock clip.
  5. Ensure that the transmission is in 4th gear.
    6. Fig 3: Locking Shift Cable Retainers
    GM646529Courtesy of GENERAL MOTORS CORP.
  6. Press and lock the shift cable retainers.
    7. Fig 4: Locating Shifter 4th Gear Locking Tab
    GM1390787Courtesy of GENERAL MOTORS CORP.
  7. Pull the shifter 4th gear lock clip to its original position.
  8. Install the cup holder. Refer to Cupholder Replacement - Front Floor Console in Instrument Panel, Gages and Console.
scientia non olet · About LEMON Manuals