Shift Cable Adjustment

WARNING: This page is about a different variant/trim than selected.

Set the parking brake.
Remove the cup holder. Refer to Cupholder Replacement - Front Floor Console in Instrument Panel, Gages and Console.

Fig 1: Unlocking Shift Cable Retainers

Courtesy of GENERAL MOTORS CORP.

Fig 2: View Of Shift Shifter Neutral Lock Clip

Courtesy of GENERAL MOTORS CORP.

Push the shifter neutral lock clip. Move the shifter slightly in order to center the lock clip.
Ensure that the transmission is in neutral.

Fig 3: Locking Shift Cable Retainers

Courtesy of GENERAL MOTORS CORP.

Fig 4: View Of Shifter Neutral Lock Clip

Courtesy of GENERAL MOTORS CORP.

Pull the shifter neutral lock clip to its original position.
Install the cup holder. Refer to Cupholder Replacement - Front Floor Console in Instrument Panel, Gages and Console.