LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical - 2.4L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Oil Level Indicator and Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Oil Level Indicator
    GM1571745Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Remove the oil level indicator.
    3. Fig 2: View of engine harness clip
    GM1656100Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine harness clip (2) from the oil level indicator tube bracket.
    4. Fig 3: Identifying Oil Level Indicator Tube
    GM1647397Courtesy of GENERAL MOTORS CORP.
  4. Remove the oil level indicator tube bolt.
  5. Remove the oil level indicator tube.
  6. Remove the oil level indicator tube O-ring seals, if necessary.
scientia non olet · About LEMON Manuals