LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical - 2.4L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Oil Cooler Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Removing Radiator Surge Tank Outlet Hose From Thermostat Cover And Oil Cooler
    GM1656116Courtesy of GENERAL MOTORS CORP.
  1. Drain the cooling system. Refer to Draining and Filling Cooling System (2.2L (L61), 2.4L (LE5)) or Draining and Filling Cooling System (GE 47716 Fill) .
  2. Reposition the oil cooler outlet hose clamp (2) at the oil cooler.
  3. Remove the oil cooler outlet hose from the oil cooler.
    4. Fig 2: Positioning Radiator Outlet Hose Clamp At oil cooler
    GM1656115Courtesy of GENERAL MOTORS CORP.
  4. Reposition the radiator outlet hose clamp (2) at the oil cooler.
  5. Remove the radiator outlet hose from the oil cooler.
    6. Fig 3: Identifying Oil Cooler
    GM1578314Courtesy of GENERAL MOTORS CORP.
  6. Remove the oil cooler bolts.
  7. Remove the oil cooler.
scientia non olet · About LEMON Manuals