LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical - 2.4L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Intake Manifold Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Intake Manifold Cover W/Oil Fill Cap
    GM1647204Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine oil fill cap.
  2. Grasp the intake manifold cover by the lower right corner and pull up to disengage the cover from the stud.
  3. Grasp the intake manifold cover by the upper left corner and pull up to disengage the cover from the stud.
  4. Remove the intake manifold cover.
scientia non olet · About LEMON Manuals