LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical - 2.4L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Oil Cooler Installation

Oil Cooler Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Oil Cooler
    GM1631331Courtesy of GENERAL MOTORS CORP.
  1. Install the oil cooler.
    2. NOTE: Refer to Fastener Notice .
  2. Install the oil cooler bolt and studs.

    Tighten:  Tighten the bolts and studs to 22 N.m (16 lb ft).

scientia non olet · About LEMON Manuals