LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls - 2.4L - Introduction (2 Of 2)) >> Repair Instructions >> Ignition Coil(s) Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
    2. Fig 1: Identifying Camshaft Position Actuator Solenoid Valve Electrical Connectors
    GM1647538Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the ignition coil electrical connector(s) (1).
  3. Remove the ignition coil bolt(s).
    4. Fig 2: View Of Ignition Coils
    GM1578474Courtesy of GENERAL MOTORS CORP.
  4. Remove the ignition coil(s).
scientia non olet · About LEMON Manuals