LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls - 2.4L - Introduction (2 Of 2)) >> Description and Operation >> Camshaft Actuator System Description >> Camshaft Position (CMP) Actuator System

Camshaft Position (CMP) Actuator System

WARNING: This page is about a different variant/trim than selected.

The camshaft position (CMP) actuator system is used on both the intake and exhaust camshafts. The CMP actuator system is used for a variety of engine performance enhancements. These enhancements include lower emission output through exhaust gas recirculation (EGR) control, a wider engine torque range, improved gas millage, and improved engine idle stability. The CMP actuator system accomplishes this by controlling the amount of intake and exhaust valve overlap.

scientia non olet · About LEMON Manuals