Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTCs P0030, P0036, P0068, P0069, P0101, P0102, P0103, P0106, P0107, P0108, P0117, P0118, P0120, P0121, P0122, P0123, P0125, P0128, P0130, P0131, P0132, P0133, P0134, P0135, P0136, P0137, P0138, P0140, P0141, P0201-P0204, P0220, P0222, P0223, P0300, P0301-P0304, P0442, P0443, P0446, P0449, P0451, P0452, P0453, P0454, P0455, P0496, P0506, P0507, P1133, P1134, P1516, P1680, P1681, P2101, P2119, P2120, P2122, P2123, P2125, P2127, P2128, P2135, P2138, P2176 are not set.
The engine is in Closed Loop status.
The engine coolant temperature (ECT) is between -7 and +120°C (+19.4 and +248°F).
The intake air temperature (IAT) is between -7 and +145°C (+19.4 and +293°F).
The manifold absolute pressure (MAP) is between 15-100 kPa (2.2-14.5 psi).
The mass air flow (MAF) is between 1-512 g/s.
The vehicle speed is less than 132 km/h (82 mph).
The engine speed is between 400-6,100 RPM.
The barometric pressure (BARO) is greater than 72 kPa (10.4 psi).
The fuel level is more than 10 percent.
DTC P0172 runs continuously when the above conditions have been met.