LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls - 2.0L - Introduction (2 Of 2)) >> Repair Instructions >> Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
Fig 1: View Of Engine Purge Pipe
GM1387195Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the engine purge pipe from the evaporative emission (EVAP) canister purge valve.
  2. Disconnect the engine purge pipe from the throttle body.
  3. Remove the engine purge pipe.
scientia non olet · About LEMON Manuals