LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls - 2.0L - Introduction (2 Of 2)) >> Repair Instructions >> Air Cleaner Element Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Installing The Air Cleaner Filter Into The Air Cleaner Housing
    GM1601692Courtesy of GENERAL MOTORS CORP.
  1. Install the air cleaner filter into the air cleaner housing.
  2. Install the air cleaner cover to the air cleaner housing.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the air cleaner housing cover screws (3).

    Tighten:  Tighten the air cleaner housing screws to 3 N.m (27 lb in).

  4. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .