LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 895 (Horn System) >> Repair Instructions >> Horn Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Horn
    GM1548079Courtesy of GENERAL MOTORS CORP.
  1. Position the horn (2) into the slot in the front frame rail.
  2. CAUTION: Refer to Fastener Caution .
  3. Install the horn bracket bolt (1). Tighten the bolt to 10 N.m (89 lb in).
  4. Connect the horn electrical connector.
  5. Install the left headlamp housing bracket. Refer to Headlamp Replacement .