LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 790 (Engine Mechanical - 2.0L) >> Repair Instructions - On Vehicle >> Turbocharger Oil Feed Pipe Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Turbocharger Oil Feed Pipe
    GM1750400Courtesy of GENERAL MOTORS CORP.
  1. Install NEW gaskets onto the turbocharger oil feed pipe fittings.
    2. NOTE: Refer to Fastener Notice .
  2. Install the turbocharger oil feed pipe and bolts.

    Tighten:  Tighten the bolts to 20 N.m (15 lb ft).

  3. Install the catalytic converter. Refer to Catalytic Converter Replacement (LNF) .
scientia non olet · About LEMON Manuals