LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 790 (Engine Mechanical - 2.0L) >> Repair Instructions - On Vehicle >> Engine Oil Cooler Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Oil Cooler Hoses & Bolts
    GM2035289Courtesy of GENERAL MOTORS CORP.
  1. Drain the charged air cooling system. Refer to Cooling System Draining and Filling (GE 47716 Fill) or Cooling System Draining and Filling (Static Fill LNF) .
  2. Disconnect the oil cooler hoses (1).
  3. Remove the oil cooler bolts (2).
  4. Remove the oil cooler.
scientia non olet · About LEMON Manuals