LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 790 (Engine Mechanical - 2.0L) >> Repair Instructions - Off Vehicle >> Engine Oil Cooler Installation

Engine Oil Cooler Installation

WARNING: This page is about a different car, the 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Oil Cooler
    GM1769545Courtesy of GENERAL MOTORS CORP.
  1. Install the oil cooler.
    2. NOTE: Refer to Fastener Notice .
  2. Install the oil cooler bolts.

    Tighten:  Tighten the oil cooler bolts to 22 N.m (16 lb ft).

scientia non olet · About LEMON Manuals