LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 785 (Wiring Systems And Power Management - DTC B1370 To DTC P2535) >> DTC B1370-B1379, B1380-B1389 or B1440-B1443 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

With a scan tool, compare all parameters listed below with the corresponding ignition key position. The PMM Power Mode Parameters  table below illustrates the correct state of these input parameters (circuits) in correspondence to the ignition switch position. The circuits which the individual parameters are related to are in parentheses.

PMM Power Mode Parameters

Ignition Switch Position Current Power Mode Ignition Off/Run/Crank
(Off/Run Crank Voltage Circuit)
Ignition Accessory/Run
(Accessory Voltage Circuit)
Ignition Run/Crank
(Ignition 1 Voltage Circuit)
Off Key Out Off Key Out/ACC Inactive Inactive
Off Key IN Off Key In/Off Inactive Inactive
Accessory Accessory Key Out/ACC Active Inactive
Run Run Run Active Active
Start Crank Request Crank Inactive Active