Turbocharger Coolant Feed Pipe Replacement

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Turbocharger Coolant Feed Pipe

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement . Drain the cooling system. Refer to Cooling System Draining and Filling (GE 47716 Fill) or Cooling System Draining and Filling (Static Fill LE5, L61) or Cooling System Draining and Filling (Static Fill LNF) .
1	Turbo Coolant Feed Pipe Fitting (Qty: 2) NOTE: Refer to Fastener Notice . Procedure: Install new gaskets to both banjo bolt fittings. Tighten: 35 N.m (26 lb ft)
2	Coolant Feed Pipe Bracket Bolt Tighten: 10 N.m (89 lb in)
3	Turbo Cooler Feed Pipe Clip
4	Turbocharger Coolant Feed Pipe