LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 784 (Engine Cooling System) >> Repair Instructions >> Radiator Inlet Hose Replacement (LNF) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Radiator Inlet Hose
    GM2040400Courtesy of GENERAL MOTORS CORP.
  1. Install the radiator inlet hose to the radiator (1).
  2. Reposition the radiator inlet hose clamp to secure the hose using J 38185  . See Special Tools .
    3. Fig 2: View Of Radiator Inlet Hose & Clamp
    GM2040317Courtesy of GENERAL MOTORS CORP.
  3. Install the radiator inlet hose to the engine (1).
  4. Reposition the radiator inlet hose clamp to secure the hose using J 38185  . See Special Tools .
  5. Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
  6. Fill the cooling system. Refer to Cooling System Draining and Filling (GE 47716 Fill)  or Cooling System Draining and Filling (Static Fill LE5, L61)  or Cooling System Draining and Filling (Static Fill LNF) .
scientia non olet · About LEMON Manuals