LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 777 (Cruise Control System) >> Diagnostic Information and Procedures >> DTC P0571-P0573 >> Conditions for Setting the DTC >> P0573

Conditions for Setting the DTC: P0573

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

The ECM detects a high voltage signal on the stop lamp switch signal circuit when the serial data message from the BCM indicates the brakes are not applied.

scientia non olet · About LEMON Manuals