Circuit/System Verification
WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Ignition ON, place the blower switch in the Low, Medium 1, Medium 2 and High speed positions. The blower motor should operate in each speed position.
- If the blower motor is inoperative at all speeds, refer to Blower Motor Inoperative in Circuit/System Testing .
- If the blower motor functions at a single speed only, refer to Blower Motor Malfunction in Circuit/System Testing .