LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 765 (Engine Control System & Fuel System - 2.2L (L61) - Introduction (2 Of 2)) >> Repair Instructions >> Ignition Coil Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Intake Manifold Cover
    GM1751023Courtesy of GENERAL MOTORS CORP.
  1. Ensure that the ignition key is in the OFF position.
  2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  3. Disconnect the ignition coil electrical connector(s) (1).
    4. Fig 2: View Of Ignition Coils
    GM1578474Courtesy of GENERAL MOTORS CORP.
  4. Remove the ignition coil bolt(s).
  5. Remove the ignition coil(s).
scientia non olet · About LEMON Manuals